KALYPSO IP67
KALYPSO is a minimalistic luminaire suitable for wall grazing. Due to its three optics, IP67 and IK rating, a large range of applications is covered. A maximum output of 4,290 lm/m combined with a CCT ranging between 2,000 K to 5,000 K makes KALYPSO a multifunctional luminaire.
Convinces with light intensity and precise light control
High lumen output in minimalistic design with a small cross section of (W x H) 20.5 mm x 25.5 mm.
Screwed translucent end caps for continuous rows and an optimal sealing at both ends of the luminaire.
Robust polyurethane encapsulated fixture with IP67 and IK10 classification.
KALYPSO IP67
KALYPSO is a minimalistic luminaire suitable for wall grazing. Due to its three optics, IP67 and IK rating, a large range of applications is covered. A maximum output of 4,290 lm/m combined with a CCT ranging between 2,000 K to 5,000 K makes KALYPSO a multifunctional luminaire.
It is IK10 certified and therefore particularly robust against environmental impacts. The utilized polyurethane features a 5 times higher chemical resistance and a 10 times lower water transmission compared to typical silicones for LED applications in the relevant temperature range (-50°C to 80°C). The profile with a small cross section of (W x H) 20.5 mm x 25.5 mm allows the use of three different linear lenses. 10° grazing light and 30° or 60° general illumination optics are available and guarantee a targeted illumination. Screwed diffuse end caps for an optimal sealing at both ends of the luminaire. It is available in five standard lengths and is supplied ready to plug in with a IP67 mini connector. The installation is realized with invisible light joints and connections. It is perfectly suited for the accentuation of structured facades and walls, as well as for highlighting architectural details on buildings, windows and gables.
Technische Spezifikationen
Lichtverteilungskurven
Abmessungen
Elektrische & optische Betriebsdaten
| Spannung | VDC (23 Vmin, 25 Vmax) |
|---|
| Leistung (W/m) |
| Effizienz (lm/W) |
| max. Länge (m) |
| Farbtemperatur | |
|---|---|
| Bestellnummer | CCT Leuchte | lumen/m (lm/m) |
Montagemöglichkeiten
Aluminum mounting clip with washer. Clips inside the fixture profile for invisible mounting. Use according to the mounting instruction
Metal mounting block with set screw for vertical applications. Install inside the fixture profile to stop the fixture from sliding. Recommended to use one mounting lock per fixture.
Aluminum mounting clip with washer. Clips inside the fixture profile for invisible mounting. Use according to the mounting instruction
Metal mounting block with set screw for vertical applications. Install inside the fixture profile to stop the fixture from sliding. Recommended to use one mounting lock per fixture.
140 mm silver adjustable mounting clip with a tilt of 60° to each side. Recommended to use one mounting lock (#13000287) per horizontal installation.
Metal surface mounting adjustable wall arm. The set includes mounting block, mounting clip and adjusting screws. Tilts 140° in each direction and screw locks in position. Recommended to use for every 90 cm. Silver finish.
